Fatboy Fabrication

Fatboy Fabrication Light fabrication, specialising in TIG welding of aluminum and stainless steel.

Fat Fab has moved to 5 McPherson Cct in the Pambula industrial estate. It's been a fairly big job, but it's taking shap...
05/04/2026

Fat Fab has moved to 5 McPherson Cct in the Pambula industrial estate. It's been a fairly big job, but it's taking shape. A bit more organising tomorrow & we'll be good to go Tuesday morning.

We finished the 40lt still & another oil seperator & built a different type of worker pod to a customer's design. It han...
16/12/2025

We finished the 40lt still & another oil seperator & built a different type of worker pod to a customer's design. It hangs off the side of an oyster punt for a worker to sit in while flipping bags.

Today's mission was an easy one. Welding out a 40lt still pot that Cal rolled the parts for & tacked up ready for me to ...
06/12/2025

Today's mission was an easy one. Welding out a 40lt still pot that Cal rolled the parts for & tacked up ready for me to weld out. Callum has played a huge part in keeping the doors open since my motorcycle mishap in April.

We finished the 205lt still & oil seperator this week.
05/12/2025

We finished the 205lt still & oil seperator this week.

We finished the first of three 4.5m aluminium pedestrian bridge sections to cross a creek on a customer's property this ...
22/11/2025

We finished the first of three 4.5m aluminium pedestrian bridge sections to cross a creek on a customer's property this week. Everything that will be visible is Tig welded & the rest done with Mig. Each section has 50mm of curve, which will give 460mm of curve over the full length. There was a lot of head scratching in the design of this project.

With the condenser almost finished it's time to start the barrel. Sometimes you have to think outside the square to get ...
21/11/2025

With the condenser almost finished it's time to start the barrel. Sometimes you have to think outside the square to get a good earth when there's nothing to clamp to.

We've started building a 205lt still for Blue Moon Distillers which requires a fairly major upscale for the condenser.
20/11/2025

We've started building a 205lt still for Blue Moon Distillers which requires a fairly major upscale for the condenser.

Today's challenge was milling a hex onto a shaft the old fashioned way, without a dividing head or hex collett chuck. It...
17/09/2025

Today's challenge was milling a hex onto a shaft the old fashioned way, without a dividing head or hex collett chuck. It turned out pretty well.

Address

Pambula, NSW

Telephone

+61466338815

Website

Alerts

Be the first to know and let us send you an email when Fatboy Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share