11/12/2024
7.1 Setting administrator cards
1. Connect the power supply to the indoor monitor and connect the indoor
monitor to the outdoor doorbell with the 4Pin wire.
2. Unplug the 4Pin wire, and connect the 4Pin wire again. The indoor monitor enters the monitoring mode. Press the ‘unlock’ button within 10 seconds.
The red and green lights of the outdoor doorbell are on both.
3. Swipe the first card, this card becomes the Adding card for administrator, the green light goes out and the red light remains on, beep once.
4. Swipe the second card, this card becomes the Deleting card for administrator, the red light goes out, and a long beep sounds.
If the adminstrator cards has been set before, the previous cards is invalid.
7.2 Add user card
1. Swipe the Adding card for administrator, the green light is on and beep twice.
2. Swipe the user cards one by one, and each swipe will beep.
3. Swipe the Adding card for administrator again, the green light goes out and beep twice, added successfully.
If do not swipe the Adding card for administrator again, failed to add the user card, will automatically exit in 15 seconds.
7.3 Delete user cards
1. Swipe the Deleting card for administrator, the red light is on and beep twice.
2. Swipe the user cards one by one, and each swipe will beep.
3. Swipe the Deleting card for administrator again, the red light goes out and beep twice, deleted successfully.
If do not swipe the Deleting card for administrator again, failed to delete the user cards, will automatically exit in 15 seconds.
