17/05/2026
Replacing your stove glass is quick and easy! 🔧
There are two types of glazing, single and double, depending on the model and door type (cast or steel). To replace your stove glass, take the door off and rest it on a surface that will protect the handle.
Single: The glass is held in place with retaining bars. Remove the bars, position the replacement glass, tighten the screws just enough to pinch the glass. Over tightening can cause the glass to crack. Check that the glass seal (the flat rope 2mm x 10mm, between the glass and stove body) is intact. If worn that can be replaced at the same time.
Double: The glass is held in place with retaining channels and screws. Remove the screws and the channels, position the replacement glass, ensure the between-glass-seals are in place, re-fit retaining channels and tighten screws just enough to pinch the glass. Over tightening can cause the glass to crack.
Replacements are available to order through our online spares shop 🔥
(Psst. Don’t forget to use code MAY26 for £10 off your next spares order)